| Tilmaamid | TCK550 | ||
|
| |||
| Range shaqo | Waxa ugu badan ee ku lulaya sariirta sariirta. | mm | Φ550 |
| Ugu badnaan lulaya dia isdhaafka | mm | Φ300 | |
| Dhexroorka ugu badan ee rogashada | mm | Φ550/900 | |
| dhexroorka leexashada ugu badan | mm | Φ550 | |
| Dhexroorka chuck Hydraulic | mm | Φ250 | |
| Spinal sanka | / | A2-8 (GB/T5900.1) | |
| SPIND LE | Cirridka lafdhabarta | mm | 66 |
| Xawaaraha ugu badan ee leexashada | rpm | 20-3500 | |
| Awoodda matoorka | kW | 7.5 | |
| kaydka dabada | Dhexroorka/falaag ee gacanta dabada | mm | 100 |
| Gacan ku gal godka taper | MT4 | ||
| Saldhig simbiriirixan | Gradient | DEG | 45 ° |
| X/Z safarka | mm | 300/1000 | |
| Xawaaraha dhaqsaha badan X/Z | m/min | 20/24 | |
| Matoorka Servo X/Z | Nm | 10/15 | |
| Dhexroor maroodiga kubbadda X/Z | mm | Φ40X12/40X12 | |
| Foomka boostada qalabka | / | 12 | |
| Cabbirka qalabka | mm | 25×2 5/Φ32 | |
| awood | kVA | 20 | |
| cabbirka | mm | 2950X1670X1660 | |
| miisaan | kg | 5000 | |
Lathe u janjeerta CNC TCK550, 45 digrii CNC lathe u janjeerta sariir aan isku mid ahayn, dabada dabada biyaha CNC, qiimo dhimis sariirta
Dulmar:
1) Mashiinkan waxaa loo isticmaali karaa leexinta, qodista, caajiska, tuubada, iyo leexinta dusha sare;
2) Qalabka lagu farsamayn karo mishiinkani waa biraha sida birta, birta, aluminium alloy, copper iyo copper alloy, iyo adkaanta dusha guud ee HRC30;
3) Graphite, balaastikada injineernimada, bakelite, alwaax iyo walxaha kale ee aan biraha ahayn kuma habboona in lagu farsameeyo mashiinkan;
2.2 Xadka shaqada:
1) dhexroorka workpiece jeestay waa 550mm;
2) Faalig dheeri ah: dhidibka X: 300mm dhidibka Z: 1000mm;
3) Dhererka Machining ee workpiece: 550/900mm
4) Naqshad sariireed oo 45-degree ah
Waqtiga boostada: Nov-19-2021