1.H50mashiinka lathe cnc oo leh qalab noolNaqshadeynta isdhexgalka korantada, muuqaalka bilicsanaanta, qaab dhismeedka macquulka ah, waxqabadka qiimaha sare leh iyo qiimaha sare ee tareenka khadka.
2..mishiinka wax-shiidka mini lathe oo leh nololJidhka sariirta oo fiiqan, ka hortagga qallafsanaanta, hagaajinta qallafsanaanta iyo saxnaanta.
3. Themashiinka lathe cnc yarusheeda dhexe waxay qabataa unugga dunta saxda ah, garaaca radial waa yar yahay, qalliinku waa siman yahay, buuqu waa yar yahay, xawaaruhu waa sarreeyaa, nolosha adeeggu waa dheer yahay, xawaaraha ugu badan ee unugga usheeda dhexe ee Luyoung wuxuu gaari karaa daqiiqad kasta 4000 Xawaaraha ugu badan ee wareega ee usheeda dhexe ee Taiwan posen waxa lagu gaadhi karaa 6000 revolutions daqiiqadii.
4.H50Xadiidka khadka iyo usha birta ah waxay qaataan alaabta lacagta Taiwan, saxnaanta sare, waxqabadka firfircoon, xasilloonida sare, dhakhso leh waxay gaari kartaa 20 mitir daqiiqadii.
5. Qaado guangzhou CNC 980TB iyo nidaamka 980TD oo leh hawlo awood leh, jawaab degdeg ah iyo hawl fudud.
Tilmaamid
| Jidka Tooska ah ee Mashiinka Lathe CNC H50 | ||
| maxsariirta korkeeda lulaya | Φ500mm | |
| maxlulid korka slide | Φ220mm | |
| Chuck/collet | collet pneumatic | |
| X dhidibka max safarka | 700mm | |
| Z dhidibka max safarka | 700mm | |
| Jidka haga | Jidka hagaha xawaaraha sare ee toosan | |
| Xawaaraha lafdhabarta | 2500rpm (nooca unugga lafdhabarta) | |
| Spinal sanka | A2-5 | |
| daloolka lafdhabarta | Φ52mm | |
| Bar dhexda dunta | Φ42mm | |
| Xawaaraha quudinta degdega ah | X:20 Z:20 m/daqiiqo | |
| Awoodda dhaqdhaqaaqa ugu weyn | 7.5KW (servo) | |
| Cabbirka qalabka | 20*20 mm | |
| X/Z min halbeegga | 0.001 mm | |
| saxnaanta X/Z booskaI | 0.01 mm | |
| X/Z Dib u Dhigista Saxnaanta | 0.005 mm | |
| X/Z servo matoorka | 4/6N.M | |
| Matoorka bamka qaboojinta | 125w | |
| awoodda haanta qaboojinta | 30L | |
| Qalabka noolasha | Tirada qalabka | 3 qalab dhinac + 3 dhamaadka wejiga |
| Awoodda matoorka | 0.75kw (servo) | |
| Xawaaraha ugu badan ee leexashada | 2500rpm | |
| Cabbirka qalabka | 3-20mm | |
| dhidibka Y | Tirada safarka dhidibka Y | 150mm |
| Awooda dhidibka Y | 0.75kw (servo) | |
| Miisaanka | 3T | |
| Cabirka (mm) | 2600*2100*2200 | |
Waqtiga boostada: Febraayo-10-2022